Disc Brake Rotors
UFP Disc Brake Rotors for DB-35 & DB-42 Brake Assemblies. All Rotors are available in an E-Coat or Zinc Plated Finish. Oil Bath & Grease Rotors are also available.
Ventilated Design
Rotor surface temperatures, which rise rapidly from repeated stopping (or slowing on mountain grades), can be held down to acceptable levels only by using a ventilated rotor to allow heat to escape. Less expensive, non-ventilated rotors overheat, causing rapid brake pad deterioration, excessive rotor surface wear and warping.
Manufactured from Cast Iron
Cast iron is the best material for rotors. It has superior wear characteristics at high temperatures compared to other types of steel. It will not warp.
NOTE: Rotors included Bearings, Seals & Cotter Pins.
Questions on which Rotor you have? Please feel free to give us a call: 1-888-479-6920
STOCK#
UFP DB-35, 5-Lug on 4.5" Oil Bath Rotor for use with up to 4200lb. Axles.
Rotor Diameter: 9.75"
Bearing Size: 68149, Inner and Outer
Spindle Size: 1 3/8" Straight Spindle
STOCK#
UFP DB-42, 5-Lug on 4.5" Oil Bath Rotor for use with up to 4200lb. Axles.
Rotor Diameter: 10.25"
Bearing Size: 68149, Inner and Outer
Spindle Size: 1 3/8" Straight Spindle
