EQUALIZER BARS & SUSPENSION KITS
EQUALIZER BARS, TRAILER LEAF SPRING SUSPENSION KITS AND BUSHINGS
Trailer equalizer bars and heavy duty suspension leaf spring kits for use in tandem or triple axle trailer suspensions. Triangular and straight equalizer rocker bars are available in many different configurations. Steel and Nylon spring bushings are also available along with center bushings and bolts.
This trailer suspension equalizer bar is commonly found on EZ-Loader Boat Trailers. Galvanized finish provides excellent corrosion protection in harsh marine environments. Bolt holes are 9/16" in diameter and are on 7" centers.
Common triangle style equalizer rocker bar has 5 1/2" hole centers. This equalizer connects double-eye springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Center bolt hole is 9/16" in diameter.
Common triangle style equalizer rocker bar has 7 3/4" hole centers. This equalizer connects double-eye springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Center bolt hole is 9/16" in diameter.
Trailer spring equalizer bar used in multi-axle suspensions which accommodate Double Eye, C-Hook or Slipper style leaf springs. (1-3/4" spring width)
Common triangle style equalizer rocker bar has 5 3/4" hole centers. This equalizer connects double-eye springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Center bolt hole is 9/16" in diameter.
Straight equalizer rocker bar connects double-eye springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Center bolt hole is 9/16" in diameter. Hole centers are on 8" centers
Straight equalizer rocker bar connects double-eye springs on tandem- or triple-axle trailers and transfers impact between the axles to ensure that the load is evenly distributed. Center bolt hole is 9/16" in diameter. Hole centers are on 5 1/2" centers
This molded sleeve bushing is used with the galvanized c-hook equalizer bar #C-250-031579-10. Includes steel sleeve inside molded bushing with a 5/8" center hole diameter.
This 5/8" diameter center bolt is for use with the center bushing that is required for the Galvanized equalizer bar. 5/8" nylon lock nut included.
Nylon spring bushing for use with steel spring bushing with a 3/4" OD. Commonly found on EZ-Loader Trailers and other makes that require a nylon and steel spring bushing.
Steel spring bushing for use with nylon spring bushing with a 1" OD. Commonly found on EZ-Loader Trailers and other makes that require a nylon and steel spring bushing.
For 33" axle centers and axles up to 6000lbs. 26.00" Double Eye Springs - Tandem
The E-Z Flex™ equalizer in this kit (PN 013-143-03) can replace existing (PN 013-104-02) equalizers.
For 1-3/4" wide, double eye springs - tandem axles (replacement for A/P-233-00). 33" axle spacing.
For 1-3/4" wide, double eye springs - tandem axles with 4" high equalizer (replacement for A/P-247-00).
For 1-3/4" wide, double eye springs - triple axles (replacement for A/P-335-00). 33" axle spacing.
