BRAKE LINE KITS, PARTS & FITTINGS
HYDRAULIC TRAILER BRAKE LINE KITS AND FITTINGS
Hydraulic brake lines are manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527. The inverted flare tube nuts conform to SAE J512 and the flares are fabricated per SAE J533b.
The standard OD finish for our hydraulic brake line assemblies is Aluminum Galfan (AG). This finish provides extended corrosion and abrasion resistance by combining a hot dip coat of the alloy Galfan with an aluminum rich epoxy top coat.
The standard hydraulic brake line kits listed below are designed to be used on trailers using either surge brake actuators or power
brake actuators (vacuum/hydraulic, air/hydraulic or electric/hydraulic).
Features:
•All kits are supplied complete with hydraulic brake lines, brake hoses, hydraulic fittings and mounting hardware
•Manufactured using double wall brazed low carbon steel tubing in accordance with SAE J527
•Inverted flare tube nuts conform to SAE J512 and the flares are fabricated per SAE J533b
•All brake fluid carrying components meet the applicable SAE standard
•Drum or disk brake setup
•Leaf spring or torsion suspension
STOCK# 330005
Hydraulic-Stainless Steel brake line kit for leaf-spring suspension axles with drum or disc brakes. 20' is measured from the actuator to the axle 'T' fitting.
STOCK# 330002
Hydraulic brake line kit for Torsion axle suspension with drum or disc brakes.
20' is measured from the actuator to the axle 'T' fitting.
3/16" x 24" flexible brake lines with brass couplings, required when using steel brake lines.
Thermo-Plastic Hydraulic Brake Lines. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Thermo-Plastic Hydraulic Brake Lines. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Thermo-Plastic Hydraulic Brake Lines. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Thermo-Plastic Hydraulic Brake Lines. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Thermo-Plastic Hydraulic Brake Lines. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Typically used for the across the axle line. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Typically used for the across the axle line. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
19 Foot in Length or 228". Typically used as the main line. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
22 Foot in Length or 264". Typically used as the main line. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
25 feet in Length or 300". Typically used as the main line. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
30 feet in Length or 360". Typically used as the main line. These composite brake lines come standard with corrosion resistant brass fitting. The Flexible hose is ideal for all trailer applications. All Thermo-Plastic lines have a working pressure of 3000psi and meet or exceed FMVSS standards.
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
Perfect for use with foldaway trailer tongues, this flexible hose functions as part of a hydraulic brake actuator system. Connect line to your actuator's master cylinder to route brake fluid to your trailer's brakes. Fittings included.
3/16" O.D. AG Coated Steel Brake Line with 3/8"x24 thread steel end fittings and 45 degree double flare tube ends.
