AXLE SPINDLE NUTS, WASHERS & COTTER PINS
TRAILER AXLE HARDWARE, SPINDLES NUTS, WASHERS AND COTTER PINS
Suspension accessories for trailers of all makes and types. Trailer spindle washers, spindle nuts, cotters pins and retaining rings. Be sure to examine the spindle on your trailer to determine exactly which type you may have. Tang Washers are also offered and are typically used with posi-lube spindles.
The diagram below shows a typical d shape spindle with the breakdown of the hub assembly.
Typically used with EZ-Lube spindles, Posi-Lube spindles and other tang washer applications. The "tang" or 90 degree flap on this washer presses down between the slot on a slotted axle nut.
Fits Standard 1" Threaded Spindles
For use on 3/4" threaded trailer spindles with a D shape or "flat spot"
This D style washer is very common and used on EZ-Loader trailers and Trailer Buddy by UFP Axles.
Commonly used on EZ-Loader Trailer Axles. This Keyed flat washer is for keyed or notched axle spindle applications prior to 1995. EZ-Loader trailers built in 1995 can have a keyed washer or the current D shaped washer. TEMPORARY OUT OF STOCK
This Keyed flat washer is for keyed or notched axle spindle applications.
Use this retainer when your axle spindle us D-Shaped and does not have a cotter pin hole.
Used with "D" style spindles with cotter pin hole. Common on Loadrite and EZ-Loader trailer axles. Use with axle nut retainer to complete installation.
1/8" X 2" Cotter pins, set of 2.
1/8" X 2 1/2" Cotter Pins, Set of 2